Temperature Control 24V DC 
Order Number: ILLZTC24K

Order number

Description

max. power

fanmotor

max. current

fanmotor

ILLZTC24

Fan control 24V DC

340 W

12 A

 

Working principle:

- Soft start and temperature-sensitive  fan speed control

- Maximum starting current is appr. 10% higher than

  nominal current of the fan motor

- Fan speed is regulated depending on the oil temperature

  by means of a temperature sensor (accessories)

- Overload and inverse polarity protection on supply

- Temporarily delayed fan activation for self-protection

 

Measurement input

- Optional temperature sensor

  (control range 45-55°C (113-131°F), order no. ILLZTT5067)

- or temperature switch

  (set point 47°C (117°F), order no. ILLZTH4767)

- Connection: plug connection DT 04-2

  (make Deutsch)

 

Ambient conditiones

- Ambient temperature range:-20 to +85°C (-4°F to +185°F)

- Storage temperature range: -60 to +110°C (-76°F to + 230°F)

 

Relay output

- Max. current fan motor: 12A / 24V DC

- Connection: plug connection Metripack 280

  (make Delphi)

 

Supply

- 24V DC (18V-32V)

- Please note:

  Observe the maximum allowable voltage supply of

  the fan motor. The allowed voltage range of the fan

  might differ from the allowed voltage range of the

  temperature control.

- Inverse polarity protection

  (in case of inverse polarity of supply, ILLZTC24 is

  deactivated. After changing the polarity control is

  ready for use.)

- Overload protection

  (if supply voltage exceeds 32V, the control is

  switched off to protect the fan. After supply voltage

  is falling under 24V, control is activated again

  automatically)

- Closed current: 4mA

- recommended fuse: 16A fast acting

 

Housing

- Material: polyamide

- Protection: IP 67

- Any mounting position

- weight: 0,32kg (0.7lbs)

 

Accessories

- temperature sensor ILLZTT5067

- temperature switch ILLZTH4767

DRAWING:
Print Page